Fill up to approx. 2 cm (1 inch) from edge.
Let the dry wick soak for half an hour before lighting the lamp.
»Ellipse II« oil lamp instructions
|
|
|
|
|
Filling her up with lamp oil. Fill up to approx. 2 cm (1 inch) from edge. |
Lighting the lamp. Let the dry wick soak for half an hour before lighting the lamp. |
|
|
|
|
Adjust flame height first time. Make sure the wick has the same height all the way round the circular burner's top edge. If not you must trim it with a pair of scissors or a sharp knife. A straight wick edge is essential for a uniform flame! |
Enjoy the cosy light! You put out the oil lamp by blowing out the flame. Blow on the slant into the top of the chimney. For more information please have a look at our general oil lamp instruction. |
Spare parts:
| Article no. | Description | Material |
| 65 03 51 | Opalescent shade | 3-layer glass |
| 10 15 35 | Wick 35x230mm | 100% cotton |
| 20 06 13 | 6''' Chimney ø34x130mm | Clear glass |
Download instructions in Danish pdf document: Ellipse II instruktion - dansk
Download instructions in English pdf document: Ellipse II instructions - English
Return (one step backwards)
Home
|
|